Some tools offerred in our online store may benefit from some guidance. The new tool user guides listed may be viewed at any time and are limited to only those tools offerred online here. Always perform very safe shop practices. View: >>>>
Fill the brake sytem master cylinder. Be careful to keep the master cylinder topped off through out the complete brake bleeding procedure. Remove the bleeder screw from the wheel cylinder and clean. Replace screw finger tight.
Connect one end of long bleeder hose to the bleeder lid connector. Insert cone shaped brake bleeder adaptor into the other end of long bleeder hose.
Open bleeder screw on one brake caliper or wheel cylinder 1-1/2 turns. Insert cone adaptor into open bleeder screw to collect discharge brake fluid.
Slowly pump brake pedal to discharge fluid. Inspect tube for air bubbles and continue process until bubbles in long tube disappear. Remove cone adaptor from bleeder screw and tighten the bleeder screw back to original position.
Repeat procedure for remaining cylinders. It is important to follow the brake bleeding sequence designated by your vehicle's manufacturer for your vehicle's make, model, and year. Secure all bleeders and check for leaks.
